pneumatic_air_requirement::DoubleActingInput Struct Reference

Input parameters for the double-acting piston air requirement calculation. More...

#include <pneumatic_air_requirement.h>

Public Attributes
double	cylinder_diameter = 0.0
	Inner bore diameter of the cylinder \([\unit{\inch}]\).
double	cylinder_stroke = 0.0
	Piston travel distance per stroke \([\unit{\inch}]\).
double	piston_rod_diameter = 0.0
	Diameter of the piston rod \([\unit{\inch}]\).
double	air_pressure = 0.0
	Operating gauge pressure at the cylinder inlet \([\unit{\psi}]\).
double	cycles_per_min = 0.0
	Number of complete cycles (two strokes) per minute \([\unit{\per\minute}]\).

Detailed Description

Definition at line 63 of file pneumatic_air_requirement.h.

Member Data Documentation

air_pressure

double pneumatic_air_requirement::DoubleActingInput::air_pressure = 0.0

Definition at line 67 of file pneumatic_air_requirement.h.

cycles_per_min

double pneumatic_air_requirement::DoubleActingInput::cycles_per_min = 0.0

Definition at line 68 of file pneumatic_air_requirement.h.

cylinder_diameter

double pneumatic_air_requirement::DoubleActingInput::cylinder_diameter = 0.0

Definition at line 64 of file pneumatic_air_requirement.h.

cylinder_stroke

double pneumatic_air_requirement::DoubleActingInput::cylinder_stroke = 0.0

Definition at line 65 of file pneumatic_air_requirement.h.

piston_rod_diameter

double pneumatic_air_requirement::DoubleActingInput::piston_rod_diameter = 0.0

Definition at line 66 of file pneumatic_air_requirement.h.

---

The documentation for this struct was generated from the following file:

• include/compressedAir/pneumatic_air_requirement.h