Inputs for a pump system whose suction condition is measured by a gauge. More...

#include <pump_head.h>

Public Attributes
double	specific_gravity
	Fluid specific gravity \([\unit{\unitless}]\).

double	flow_rate
	Volumetric flow rate \([\unit{\gallon\per\minute}]\).

double	suction_pipe_diameter
	Pipe inside diameter at the suction pressure-measurement location \([\unit{\inch}]\).

double	suction_gauge_pressure
	Suction gauge pressure \([\unit{psig}]\).

double	suction_gauge_elevation
	Elevation of the center of the suction gauge from the common datum, or the corrected pressure reference \([\unit{\foot}]\).

double	suction_line_loss_coefficients
	Aggregate suction-line loss coefficient \([\unit{\unitless}]\).

double	discharge_pipe_diameter
	Pipe inside diameter at the discharge pressure-measurement location \([\unit{\inch}]\).

double	discharge_gauge_pressure
	Discharge gauge pressure \([\unit{psig}]\).

double	discharge_gauge_elevation
	Elevation of the center of the discharge gauge from the common datum, or the corrected pressure reference \([\unit{\foot}]\).

double	discharge_line_loss_coefficients
	Aggregate discharge-line loss coefficient \([\unit{\unitless}]\).

Detailed Description

Definition at line 24 of file pump_head.h.

Member Data Documentation

◆ discharge_gauge_elevation

double pump_head::SuctionGaugeInput::discharge_gauge_elevation

Definition at line 33 of file pump_head.h.

◆ discharge_gauge_pressure

double pump_head::SuctionGaugeInput::discharge_gauge_pressure

Definition at line 32 of file pump_head.h.

◆ discharge_line_loss_coefficients

double pump_head::SuctionGaugeInput::discharge_line_loss_coefficients

Definition at line 34 of file pump_head.h.

◆ discharge_pipe_diameter

double pump_head::SuctionGaugeInput::discharge_pipe_diameter

Definition at line 31 of file pump_head.h.

◆ flow_rate

double pump_head::SuctionGaugeInput::flow_rate

Definition at line 26 of file pump_head.h.

◆ specific_gravity

double pump_head::SuctionGaugeInput::specific_gravity

Definition at line 25 of file pump_head.h.

◆ suction_gauge_elevation

double pump_head::SuctionGaugeInput::suction_gauge_elevation

Definition at line 29 of file pump_head.h.

◆ suction_gauge_pressure

double pump_head::SuctionGaugeInput::suction_gauge_pressure

Definition at line 28 of file pump_head.h.

◆ suction_line_loss_coefficients

double pump_head::SuctionGaugeInput::suction_line_loss_coefficients

Definition at line 30 of file pump_head.h.

◆ suction_pipe_diameter

double pump_head::SuctionGaugeInput::suction_pipe_diameter

Definition at line 27 of file pump_head.h.

The documentation for this struct was generated from the following file:

include/motorDriven/pump/pump_head.h

Public Attributes