Heat required for moisture remaining in the solid after discharge.

\begin{equation}\label{eq:solid-load-charge-material-remaining-moisture-cpp} Q_{moisture,rem} = m_{feed} \cdot f_{discharged} \cdot (T_{vapor,discharge} - T_{boil})\end{equation}

Symbols

\(Q_{moisture,rem}\)	Heat for remaining moisture \([\unit{ \btu\per\hour}]\)
\(m_{feed}\)	Charge feed rate \([\unit{ \pound\per\hour}]\)
\(f_{discharged}\)	Fraction of water discharged \([\unit{ \unitless}]\)
\(T_{vapor,discharge}\)	Water vapor discharge temperature \([\unit{ \degreeFahrenheit}]\)
\(T_{boil}\)	Boiling point \([\unit{ \degreeFahrenheit}]\)